Every job we do gets photographed, the problem we found, the parts that came out, and the repair that went back in. Here's a sample of real jobs from the shop in San Jacinto and mobile calls across Riverside County.
This Optima came in with worn control arm bushings, a damaged brake backing plate, and a rumbling wheel bearing. We replaced the hub bearings, rebuilt the rear parking brake hardware, and sent it out riding tight again.
A 36-year-old V8 stripped to the block on the stand, heads cleaned up and prepped, and the rotating assembly gone through piece by piece. Classic iron deserves to keep running.
On the 3.5L the water pump lives inside the engine, driven by the timing chain, one of the biggest jobs on this platform. We tore into it, did the pump and timing service, and finished with fresh oil.
A classic Prius problem. We pulled the head, found the wear, and rebuilt the top end with a new head gasket, water pump, and timing chain, the photos show exactly what came out and what went back in.
No shop visit needed. We came to this Hemet driveway, pulled a set of badly worn plugs, and had it running smooth again the same morning. The old plugs tell the whole story.
Rough running traced to failing injectors. The intake came off, new injectors went in, and everything got buttoned back up the way the factory intended.
Shop in San Jacinto, mobile calls everywhere in Riverside County. Every job documented with photos, start to finish.